eSENSE™ Slim
eSENSE Slim is used to measure indoor air carbon dioxide concentration. This product is an ultra-compact transmitter intended for factory mounting for both wall and duct applications with the protection class IP50. A 300 mm long cable connected to the PCB makes it possible to place the sensor where mounting is difficult.
Key benefits
-Two analogue outputs
-Internal automatic self-diagnostics.
-Maintenance-free in normal applications
-Cost-optimized for connection to DDC:s
Applications
eSENSE IP50 is used to measure indoor air carbon dioxide concentration. A 300mm long cable connected to the PCB makes it possible to place the sensor where mounting is difficult.
Specifications
| Standard Specification | |
| Measured gas | Carbon dioxide (CO2) |
| Measurement range CO2 | 0 to 2000 ppmvol |
| Accuracy | ±30 ppm ±3% of reading |
| Dimensions | 106 mm x 67 mm x 26 mm |
| Maintenance |
Maintenance-free* |
| Life Expectancy | > 15 years |
| Operation temperature range | 0 to 50 °C |
| Operation humidity range | 0 to 95% RH (non-condensing) |
| Power supply | 24 VAC/VDC |
| Response time(T1/e) | 2 min. diffusion time |
| Warm-up time | 1 min. (@ full specs ≤ 15 minutes |
| Communication | Uart ( Modbus) |
| Outputs | |
| OUT 1 linear output | 0 to 10 V DC (CO2) |
| OUT 2 linear output | 0 to 5 V DC or 4 - 20mA (CO2) |
*Maintenance-free with using SenseAir ABC logic Self calibration using for normal indoor applications.
Art.no.
| Art.no. | Product | Additional features |
| 050-8-0003 | eSENSE Slim | |
| 050-8-0045 | eSENSE Slim - OUT 1 0 - 5 V | OUT1=0 to 5 V |
